|
|
| SW-4200XL Double Swing
Gate Opener
>>Gate Operator Index
|
 |
 |
|
Note: Additional
slave arm not shown^ |
|
SW-4200XL is for double swing gates at
1000 lbs and 20 ft each leaf. |
|
Low Voltage Swing Gate
Operator designed for tubular steel, vinyl,
wood, or ornamental gates for residential, farm
and commercial use.This model provides a
fast open/close speed from as low as 18
seconds. This system is capable of addressing
single family residences or multi-family
complexes of up to 20 families, and similar
commercial applications. A major improvement
with no price increase over the previous model. |
- 12 volt system,
no electrician
needed for
installation
- Gate will work
during
electrical power
outage
- Quick and easy
installation,
with user
friendly
instructions
- "The Shadow" is
designed to
blend in with
your gate
- Solar Panel
Charger
available for
remote locations
- Will operate a
gate
weighing up to
1000 lbs and 20' wide each leaf. each
leaf if all
proper
installation
procedures are
followed. Note:
Ball bearing
hinges should be
used on all
gates weighing
over 250 lbs
(113.4kg).
- Can operate 100
to 150 gate
cycles during
peak hours of
operation,
depending on
gate size and
weight (see
cycle chart link
below)
- Control box can
be mounted in
protected area
away from
receiver (may
require longer
cables)
- Control box
measures 18-1/2" high x
14-1/4" wide x
7-1/2" deep
- Receiver unit
with antenna and
10' cable can be
placed in best
location for
reception of
signal
- Can be operated
by remote
transmitter,
digital keypad,
push button or
combination
- Full systems
capable "add on
ready"
heavy-duty
control board
includes
adjustable
obstruction
sensing, gate
sequencing and
auto close
settings (0-120
seconds)
- High cycle
capability with
true soft start
and stop
operation
- Full access
ready package
includes
battery, radio
receiver, entry
transmitter, AC
transformer, and
all necessary
mounting
hardware for a
standard
installation
- Can operate as
'push to open'
or 'pull to
open' (specify
when ordering -
extra hardware
required for
push to open)
- UL rated for
Class I, II, III
& IV. System
certified to be
in compliance
with UL 325, 5th
edition
- Two-year limited
warranty applies
to replacing
parts.
|
|
|
